Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Connection to water supply
Attach the hose to the water tap by screwing it onto the thread.
INFORMATION!
For normal washing machine operation, the pressure in the water mains should be between 0.05
and 0.8 MPa (0.5 8 bar). Minimum dynamic water pressure can be determined by measuring the
water flow.
In 30 seconds, 1.2 litres of water should flow from a fully open tap.
INFORMATION!
Tighten the water supply hose by hand, firmly enough for the hose to have a good seal (max.
2 Nm). After connecting the hose, the seal must be checked for any leaks. Do not use pliers or
similar tools when connecting the hose as this could damage the nut thread.
INFORMATION!
Only use the water supply hose supplied with the appliance. Do not use any used or other hoses.
INFORMATION!
When connecting the water supply hose, make sure to connect it in a way that allows adequate
and unobstructed water supply.
20
A
STANDARD
CONNECTION
B
AQUA - STOP
CONNECTION
C
TOTAL AQUA - STOP
CONNECTION (WITH A
FLOAT)
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
