Download Inhoudsopgave Inhoud Print deze pagina

Preselecting The Torque - Bosch IDS Industrial 18V-200 T Oorspronkelijke Gebruiksaanwijzing

Inhoudsopgave

Advertenties

Display (user interface)

Preselecting the Torque

You can select the required torque in 9 stages using the but-
tons for torque preselection 1 and 2 ((23)/(21)). The power
Screwdriving process status indic-
ator
Green
Red
Bosch Power Tools
Description
The maintenance indicator (18) lights up
orange.
The battery status indicator (17) lights up
orange.
The battery status indicator (17) lights up
red.
The temperature alarm indicator (16)
lights up red.
tool is stopped automatically when the set torque is
reached.
A tightening status indicator (14) and an audible alarm sig-
nal will indicate the status of the screwdriving process (see
table and figure D below).
Audible alarm signal
Audio signal (1 second)
English | 21
Meaning
Scheduled maintenance is due.
Send the power tool to customer ser-
vice (see "After-Sales Service and Applica-
tion Service", page 24) for maintenance.
The battery in the power tool will soon be
empty and will soon need to be replaced
or recharged.
In addition to the display on the user
interface (8), the status indicator screw-
driving process (14) lights up red and an
audio signal sounds.
An insufficiently charged battery will im-
pair the torque of the power tool.
Recharge the battery or replace it with a
fully charged battery.
The battery in the power tool is empty and
needs to be replaced or recharged.
– The power tool has overheated. Allow
the power tool to cool down before you
carry on working.
– The power tool or rechargeable battery
is charged wirelessly. Allow the power
tool or rechargeable battery to charge
fully before you carry on working.
Meaning
The screwdriving process is proceeding
without any problems.
The torque is the same as the selected
torque preselection setting.
A fault has occurred during the screwdriv-
ing process.
Possible causes:
– The on/off switch was released too
soon
– The battery in the power tool is nearly
empty (see "User Interface
(see figure B)", page 20)
– The power tool detects a sudden load
change
1 609 92A 9DB | (13.08.2024)

Advertenties

Inhoudsopgave
loading

Inhoudsopgave