Inhoudsopgave
Advertenties
20 | English
LED worklight with status indicator
The LED worklight (11) is also used as
a status indicator for device protec-
tion:
Display (user interface)
1 609 92A 9DB | (13.08.2024)
LED
Feedback
Flashing light 3x
during downtime
User Interface (see figure B)
The user interface is used for torque preselection and to
preselect working mode, as well as to indicate the status of
the power tool.
Description
No display lights up on the user
interface (8).
The selected setting for torque preselec-
tion is shown on the display for torque
preselection (22).
The indicator for "soft screwdriving"
mode (20) lights up white.
The selected setting for torque preselec-
tion is shown on the display for torque
preselection (22).
The letter "H" appears on the display for
torque preselection (22).
The "User interface locked" indicator (19)
lights up white.
Description
Device protection is active.
Device protection has been activated to
prevent the battery from consuming a
large amount of power and to protect the
device against damage.
Meaning
The power tool and the user interface (8)
are switched off.
The user interface (8) is switched on.
"Automatic switch-off" mode is switched
on (see "Selecting the working mode",
page 22).
"Soft screwdriving" mode (20) is
switched on (see "Selecting the working
mode", page 22).
"Automatic switch-off" mode is switched
off. (see "Selecting the working mode",
page 22)
The user interface (8) is locked. The but-
tons for torque preselection 1 and
2 ((23)/(21)) are locked. The torque can-
not be changed.
You have 2 options for unlocking the user
interface:
– Via the BeConnected app/PRO360
– By resetting the user interface (8) to
factory settings, if the smartphone or
app is currently unavailable to you.
Hold down the buttons for torque
preselection 1 ((23)) or the button for
torque preselection 2 ((21)) for
6 seconds.
You can then reapply the settings via the
user interface (8).
Bosch Power Tools
Advertenties
Inhoudsopgave
