Inhoudsopgave
Advertenties
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not modify or open the battery. There is a risk of
u
short-circuiting.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery in the manufacturer's products.
u
This is the only way in which you can protect the battery
against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Application tools can become hot during operation.
u
There is a risk of burns when changing the application
tool. Use protective gloves to remove the application
tool.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.
Symbols and their meaning
Tool data logging is enabled in this tool.
Wireless connectivity power tool with
built-in NFC technology
The N-Mark is a trademark or registered
trademark of NFC Forum, Inc. in the USA
and in other countries.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Bosch Power Tools
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Rubber ring (tool holder)
(3)
Mount for holder
(4)
Rotational direction switch
(5)
Thread for belt clip
a)
(6)
Rechargeable battery
a)
(7)
Battery release button
(8)
User interface
Position of the built-in NFC antenna
(9)
(10) On/off switch
(11) Worklight
(12) Handle (insulated gripping surface)
(13) Application tool (e.g. socket spanner)
(14) Tightening status indicator
a)
(15) Holder
a) This accessory is not part of the standard scope of delivery.
User interface
(16) Temperature alarm indicator
(17) Battery status indicator
(18) Maintenance indicator
(19) "User interface locked" indicator
(20) Indicator for "soft screwdriving" mode
(21) Button for torque preselection 2
(22) Display for torque preselection
(23) Button for torque preselection 1
Technical Data
Cordless Impact Screw-
driver
Article number
Rated voltage
A)B)
No-load speed
A)B)
Impact rate
B)C)
Max. tightening torque
B)C)
Max. loosening torque
Number of settings in "Auto-
matic switch-off" mode (user
interface)
English | 17
a)
IDS 18V-200 T
3 601 JN0 0..
V=
18
–1
min
0–2500
–1
min
0–3500
Nm
300
Nm
450
9 (settings 1–9)
1 609 92A 9DB | (13.08.2024)
Advertenties
Inhoudsopgave
