Inhoudsopgave
Advertenties
en
Dispensing ice
Fig. &
Note
The ice maker must be switched on for
several hours before ice can be
dispensed.
1. Press ice dispenser On/Off button 1
for one second. When the ice
dispenser is switched on, the button
light is lit.
2. Select ice dispenser button (ice
cube 3 or crushed ice 4).
3. Press the glass against the dispenser
button until the required volume has
been dispensed.
Note
Depending on the amount of ice in the
ice cube container, it may take several
seconds until ice is dispensed.
Note
The amount of ice produced can be
increased by setting the lowest possible
temperature in the freezer compartment.
Disconnecting the ice maker
If ice cubes are not to be dispensed for
longer than 1 week (e.g. holiday),
temporarily disconnect the ice maker
to prevent the ice cubes from freezing
together.
To disconnect the ice maker:
1. Press ice dispenser On/Off button 1
for one second. The button light is
switched off when the ice dispenser is
switched off.
38
2. Remove the ice cube container.
m
Caution
A full ice cube container is heavy!
3. Empty and clean ice cube container.
Re-attach the ice cube container.
Ensure that the ice cube container
engages with the support.
4. Turn off the water supply.
Switching on again:
1. Switch on water supply again.
2. Press ice dispenser On/Off button 1
for one second. The button is lit when
the ice dispenser is switched on.
Ice cube production restarts.
It takes at least 2 hours until new ice
cubes are available.
Note
Do not use the first 30-40 ice cubes
for reasons of hygiene.
Switching button lock on/off
Fig. &
The button lock prevents the appliance
from being operated unintentionally.
Press button lock button 2 for three
seconds. The button is lit when
the button lock is switched on.
Advertenties
Inhoudsopgave
