Inhoudsopgave
Advertenties
• If possible, store the packaging until the warranty
period has expired.
4. Intended use
This welding helmet protects the eyes and face from
sparks, splashes and UV rays while welding and auto-
matically adapts to the lighting conditions.
It ensures an immediate, sensor-controlled darkening
upon arc ignition as well as automatic illumination at
the end of the welding procedure (including a short de-
lay to protect against afterglow). This welding helmet
provides a freely adjustable DIN protection level with
a lateral adjustment wheel and is also adjustable for
flying sparks during grinding work.
Only use the product as described and for its indicat-
ed purpose. Keep these instructions in a safe place.
When passing this product on to others, please also
include all the documents. Any use other than the in-
tended is prohibited and potentially dangerous. Dam-
ages resulting from non compliance or misuse are not
covered by the warranty and are not included in the
manufacturer's liability. This device has been designed
for household use and may not be used for commercial
or industrial purposes.
5. Safety regulations
m WARNING: Read all safety warnings and all instruc-
tions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Following these instructions will prevent difficulties that
may occur during the installation and use of this Auto
Dimming Welding Helmet. All technical data about this
welding helmet is on the label, please learn about this
product's technical facts. Please study the instructions
first, as they may save considerable time and trouble
during use, in addition to providing important safety
information.
Save all warnings and instructions for future ref-
erence.
• Do not use this or any other welding product unless
you have been completely instruction in its use.
• Do not use the welding helmet if the lens is cracked,
if the lens or sensors are dirt, or if the lens or front
retaining frame is loose.
• Keep work area clean. Cluttered areas invite injuries
• Observe work area conditions. Do not use welding
helmets in damp or wet locations. Do not expose to
rain. Keep work area well lit. Do not use auto-dark-
ening helmets in the presence of flammable gases
or liquids.
• Keep children and animals away. Children must
never be allowed in the work area. Do not let them
handle this helmet.
• Store idle equipment. When not in use, helmets
must be stored in a dry location. Always lock up hel-
mets and keep out of reach of children.
• Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothing, and gloves away from
moving parts. Protective gear is essential to protect
against welding rays, some examples are a leather
welding apron,welding sleeves, jeans without cuffs,
work boots. Wear restrictive hair covering to contain
long hair.
• Use eye and ear protection. When welding, wear ap-
proved impact safety goggles under the welding hel-
met. Wear an approved safety mask and ear muffs
when welding.
• Stay alert. Watch what you are doing, use common
sense. Do not weld when you are tired.
• Check for damaged parts. Before using any helmet,
any part that appears damaged should be careful-
ly checked to determine that it will operate properly
and perform its intended function. Check for align-
ment and binding of moving parts, any broken parts,
or mounting fixtures, and any other condition that
may affect proper operation. Any part that is dam-
aged should be properly repaired or replaced by a
qualified technician. Do not use the helmet if any
switch does not operate properly.
• Replace parts and accessories. When servicing,
use only identical replacement parts. Use of any
other parts can render helmet in effective, possibly
cause eye damage, and will void the warranty. Only
use accessories intended for use with this helmet.
Accessories are available from After Sales Support.
• Do not weld if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if
your judgment or reflexes are impaired while taking
drugs. If there is any doubt, do not weld.
• Maintenance. For your safety, service and mainte-
nance should be performed regularly only by a qual-
ified technician.
www.scheppach.com
GB | 19
Advertenties
Hoofdstukken
Inhoudsopgave
