Inhoudsopgave
Advertenties
1.
Set the main switch to the ON position on the device.
2.
The display will show 'S' (standby mode).
3.
Press the ON/OFF button on:
•
the control panel or;
•
the remote control.
4.
The device starts ventilating right away.
5.
The display will show '- -'.
Set the day and time
CAUTION
Setting the day and time can only be done using the remote control.
1.
Press the SET button. The display will show '12'.
2.
Press the PLUS or MINUS button to set the hour, from 0 to 23.
3.
Press the SET button to confirm. The display will show '30'.
4.
Press the PLUS or MINUS button to set the minutes, from 0 to 59.
5.
Press the SET button to confirm. The display will show 'd7'.
6.
Press the PLUS or MINUS button to select the current day, from d1 (Monday) to d7
(Sunday).
7.
Press the OK button to confirm. The display will return to the mode it was in before you
set the day and time.
8.
Press the SET button to check the day and time.
Set the temperature
CAUTION
Setting the temperature can only be done using the remote control.
1.
Press the PLUS and MINUS button to set the desired temperature, from 10 °C to 35 °C.
2.
Press the OK button to confirm.
3.
The display will show the set temperature.
If you have set the temperature, the device will select the power required to reach the set
temperature. Once the device has reached the set temperature, the heating element will
switch off but the ventilator will remain switched on for another 5 minutes. The heating
element will switch on again if the ambient temperature reaches a temperature of 2 °C below
the set temperature.
Turn off the thermostat
1.
Press the function button to set heating on low or high power.
2.
The display will show '- -'.
3.
The device will continuously heat on low or high power for 12 hours.
4.
After 12 hours the device will stop heating.
5.
The device will cool down for 5 minutes.
26
Advertenties
Inhoudsopgave
