Inhoudsopgave
Advertenties
CAUTION
The bracket serves as a safety feature to prevent the product from falling.
There is no need to drill a hole in the device. You only need the hole in the
short side of the bracket.
Make sure to place the device horizontally with the air outlet facing down.
1.
Place the device on a vertical and solid surface.
Use a level when placing the device.
2.
Place the device with a minimum distance
(Figure 6) of:
•
50 cm from the side walls;
•
30 cm from the ceiling;
•
180 cm from the floor;
•
100 cm clearance on the front side.
3.
Do not mount the device:
•
immediately below a socket outlet.
Figure 7
4.
Drill two 10 mm holes 39.8 cm horizontally apart from each other at the required
location (Figure 7, pos. 1).
5.
Insert the plugs into the holes (Figure 7, pos. 2).
6.
Firmly screw the screws into the plugs (Figure 7, pos. 3). Make sure the screws stick out
10 mm.
7.
Place the hanging eyes on the back of the device over the screws in the wall
(Figure 7, pos. 4).
Figure 6
23
Advertenties
Inhoudsopgave
