Advertenties
Key lock "TASTENSPERRE"
MENU
BENENNUNG
DATUM&ZEIT
BILDEINSTELLUNG
SENSOR
EREIGNISSE
UMSCHALTMODUS
EINSTELLUNGEN
TASTENSPERRE: AUS
Proceed as follows to change the settings:
1.
Use the arrow keys ▲ (5) and ▼ (6) to move the cursor to the item you want to change.
2.
Use the +/- keys (7) and (8) to change the value of the item.
When you have finished your entry, press the
Event display
The ECOLINE Colour Quad is able to signal diverse alarms and disturbances both acoustically and
visually. The duration of the acoustic signal can be set in the SUMMER [BUZZER] menu item. The
visual display takes place on the monitor. An explanation of the indicators:
A ALARM:
The ECOLINE Quad has received an external alarm signal through the camera input on the
rear panel.
S SENSOR:
The ECOLINE Quad has detected motion in a camera picture.
B PICTURE LOSS:
Next to the event the ECOLINE device displays the camera input number (1, 2, 3, 4).
Camera inputs for which the displayed event is relevant are indicated by flashing numbers.
B1234
The KEY LOCK menu item shows the following information:
10-00-03
22:12:05
Key lock "TASTENSPERRE"
In this menu you can activate the key lock for the device. If you
choose the ON "AN" setting and exit the menu, all keys are locked
except the Menu key.
The ECOLINE Quad has detected a video signal loss at a camera input.
(Important: this does not apply to B&W cameras.)
10-00-03
22:12:05
Event display
Menu key for at least two seconds to exit the menu item.
33
Advertenties
Hoofdstukken
