Advertenties
Programming menu
Naming "BENENNUNG"
BENENNUNG
KAM1:
KAM2:
KAM3:
KAM4:
VERLASSEN: MENUTASTE 2 SEK.
Proceed as follows to name a camera:
1.
Use the arrow keys ▲ (5) and ▼ (6) to move the cursor to the item you want to change.
2.
Use the +/- keys (7) and (8) to change the value of the item.
3.
Enter the name of the camera.
When you have finished entering the name, press the
item.
Date and time "DATUM&ZEIT"
DATUM&ZEIT
DATUM:
ZEIT:
VERLASSEN: MENUTASTE 2 SEK.
Proceed as follows to change the time:
1.
Use the arrow keys ▲ (5) and ▼ (6) to move the cursor to the item you want to change.
2.
Use the +/- keys (7) and (8) to change the value of the item.
3.
Enter the current time and date.
The simultaneous display of date and time of the recording device and ECOLINE Quad may be a problem
with regard to the display of recorded data when played back. If the display is not correctly shown, it is a
result of an overlapping of the vertical interval. In this case deactivate the date display of either the Quad or
of the recording device.
Once you have finished entering the date and time, press the
the menu item.
The Naming menu item "BENENNUNG" shows the following
information:
10-00-03
22:12:05
Naming for camera inputs 1 to 4.
Especially if four cameras are connected, it is helpful for the user to
know the installation location of each of the cameras and which
camera is currently being displayed. This is the purpose of entering
camera names.
The date and time menu item displays the following:
10-00-03
22:12:05
Current date "DATUM"
Current time "ZEIT"
This menu item allows you to change the current date and time that
displays during live monitoring.
Menu key for at least two seconds to exit the menu
Menu key for at least two seconds to exit
29
Advertenties
Hoofdstukken
