Advertenties
Rear panel connections
(1)
(2)
(1)
Voltage
12VDC
(2)
ALARM
(3)
VIDEOEINGANG
Video IN Cam 1-4
(4)
VIDEOAUSGANG
Video OUT
Cam 1-4
(5)
REKORDER Eingang
Recorder input
(6)
REKORDER Ausgang
Recorder output
(7)
MONITOR Ausgang
Monitor output
(3)
Attach the connector of the supplied 12VDC (1A) power supply unit.
This sub-D plug contact makes it possible to connect up to four potential
free (NO) or TTL/CMOS alarm contacts. This connection also has an alarm
relay output (NO/NC).
These BNC video inputs are for connecting the video cameras.
The supplied video signals from the connected cameras can be received at
these BNC video outputs. If the output is not used, terminate with the
supplied 75 Ohm resistor.
Connect the video output signal of your recording device to this BNC video
input.
Connect this BNC video output to the video input of your recording device.
A quad image is always produced.
Connect the BNC video input of your monitor to this BNC video output of
the ECOLINE Quad to be able to display the connected cameras in the
selected display format live.
26
(4)
(5)
(6)
(7)
Advertenties
Hoofdstukken
