Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
1.
Make sure the device is set to program function.
2.
Press and hold the WEEK button until 01 or ][ appears on the screen.
3.
Use the plus and minus button to choose the desired setting:
•
01 – one-off setting (must fall in the current week).
•
][ – every week setting.
4.
Confirm with the SET button; ON appears blinking on the screen.
5.
Use the plus and minus button to choose the desired anticipation setting:
•
ON – the heater will anticipate the temperature 20 minutes before it is set. If it needs to
be heated, the heater will heat with high capacity in order to heat the room to the
desired temperature by the activation time.
•
OFF – the heater will not anticipate the temperature and will turn on at set time.
6.
Confirm with the SET button, 01 SET ON appears on the screen.
7.
Use the plus and minus buttons to select:
•
the desired day, confirm with the SET button;
•
the desired temperature, confirm with the SET button;
•
the desired hours, confirm with the SET button;
•
the desired minutes, confirm with the SET button.
8.
01 SET OFF will appear on the screen; repeat step 7 to indicate the deactivation time.
9.
02 appears on the screen, there are two options:
•
Set next activation and deactivation times, repeat step 7 and 8 for every desired time.
Make sure the timer settings do not contradict each other: maximum 28 per week,
maximum 4 per day.
•
If you are done setting the activation and deactivation times, wait till screen returns to
standard settings.
10. The screen will show P and the device will automatically switch on and off at the set
time.
View weekly timer setting
1.
Press repeatedly on WEEK. You will see the following timer settings, one after the other:
•
one-off or repeated;
•
anticipation on or off;
•
temperature setting;
•
timer on-time;
•
timer off-time;
•
next timer setting.
Turning off weekly timer setting
1.
Press and hold the WEEK button until 01 or ][ appears flashing on the screen.
2.
When 01 or ][ is flashing, press and hold the MOD button until the word TIME disappears
from the display to indicate that the data will be retained but will not be active.
3.
To turn weekly timer on again, press and hold the WEEK button until 01 or ][ appears
flashing on the display.
4.
When 01 or ][ is flashing, press and hold the MOD button until the word TIME appears
on the display.
39
Advertenties
Inhoudsopgave
