Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Installation
WARNING
Do not insert the power plug into the wall socket before the device is correctly
mounted.
Do not use an extension cable; this can cause overheating and fire. If using an
extension cable is unavoidable, make sure it is undamaged and earthed. Use
an extension cable with a minimum power of 1000 Watt. Always unwind the
extension cable completely to prevent overheating.
CAUTION
Make sure that the main voltage matches the voltage indicated on the
identification label of the device. All electrical connections must stay dry under
all circumstances.
1.
Make sure the device is correctly mounted.
2.
Make sure the main switch is in the OFF
position (Figure 15, pos. 1).
3.
Insert the power plug (Figure 15, pos. 2) into
an earthed wall socket that is easily
accessible. Use an earthed wall socket with a
minimum power of 1000 Watt.
Remote control
1.
Remove the battery cover (Figure 16, pos. 1).
2.
Insert two AAA 1.5 V batteries
(Figure 16, pos. 2) as indicated in the battery
compartment. Make sure to insert the
batteries correctly.
3.
Replace the cover.
36
Figure 15
Figure 16
Advertenties
Inhoudsopgave
