Inhoudsopgave
Advertenties
Operating Instructions for SATA HRS
US
Damage to property due to improper cleaning
Immersion in solvents or cleaning agents, or using an ultrasonic cleaner
can damage the pressure spray gun.
→ Do not place the pressure spray gun in solvents or cleaning agents.
→ Do not clean the pressure spray gun with an ultrasonic cleaner.
■ Unscrew and remove pressure cup [1-4] / [1-7] / [1-13]; this simultane-
ously bleeds the pressure spray gun via the cup threading.
■ Fill pressure cup with appropriate cleaning agent and screw onto pres-
sure spray gun.
■ Shake pressure spray gun vigorously.
■ Spray pressure spray gun clean using wand attached via quick connect
coupling [1-15] and clean exterior with a cloth or cleaning brush soaked
in cleaning agent.
■ Blow the pressure spray gun dry.
12.3. Cleaning the check valve
If the check valve [1-18] is no longer working, it will need to be removed
and cleaned.
■ Remove check valve [1-18] (see 11.2).
■ Thoroughly clean spring [2-2] and ball [2-3] with appropriate cleaning
agent.
■ Lubricate spring and ball with SATA gun grease (Art. No. 48173).
■ Install check valve (see 11.2).
12.4. Cleaning the inlet valve
■ Unscrew and remove pressure cup [1-4] / [1-7] / [1-13]; this simultane-
ously bleeds the pressure spray gun via the cup threading.
■ Unscrew inlet valve [3-8] and remove from gun body [3-9].
■ Clean the inlet valve with a cloth or cleaning brush soaked in cleaning
agent.
■ Blow the inlet valve dry.
■ Screw inlet valve into gun body.
13. Troubleshooting
The troubleshooting chart below lists malfunctions, causes and remedies.
If the faults or malfunctions cannot be eliminated using the remedies de-
scribed, send the pressure spray gun in to the SATA Customer Service
36
Notice!
Advertenties
Hoofdstukken
Inhoudsopgave
