• Do not cover the charger, this may lead to overheating and result in damages. Never set the charger up for opera-
tion on a surface that is insulating (e.g. polystyrene). There is a risk of heat built up!
• If you wish to charge a vehicle battery in the installed state, first park the vehicle safely, put on the parking break
and switch off the ignition. Cut the battery off from the on-board network of your vehicle. To do this, consult the
manual for your vehicle, or ask your specialist workshop.
• This charger enables you to charge a battery without needing to disconnect it from the on-board network. If you
wish to make use of this option, make sure that your vehicle will not be damaged by this process. For this purpose,
read the manual of your vehicle or ask your specialist workshop.
• To remove the battery charger, first pull the plug out of the socket and observe the sequence for disconnection.
This prevents sparks from forming. Since charging generates a detonating gas, this is particularly important for
the sake of your safety.
• Only hold the power cable at the power plug when disconnecting from the power socket.
• Never expose the charger to the vicinity of fire, heat and extensive temperatures over +40°C.
• Store these instructions carefully and, if necessary, pass them on to other users.
6. OPERATING INSTRUCTIONS
Before using the device make sure that you have read the operating instructions for the battery and the vehicle and
you have understood all of the safety precautions.
6.1 OVERVIEW
Figure 1: View of front
Figure 2: View of rear
6.2 USING THE ADAPTER CHARGING CABLE
The adapter charging cable with pole callipers (Position 7 in the overview) is used if you wish to connect the charger in the classic
way to the poles of the battery. The adapter charging cable with eyes (Position 8 in the overview) is designed to remain firmly
attached to a battery which is difficult to access. The charger can be conveniently connected using the adapter.
10
All manuals and user guides at all-guides.com
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Figure 3: Display
Display
Control lamp – Green - Operating
Selection switch for charging programme
Control lamp – Red - Error
Mains connection cable
Charging cable with adapter
Adapter charging cable with pole callipers
Adapter charging cable with eyes
Hanging option
Safety precautions
Type plate
Motorbike mode, charging current 4 A
Car mode, charging current 8 A
Winter mode
6 V mode
12 V mode
Charge status display
Charge voltage display, error messages, maintenance charge
Operating display