Inhoudsopgave
Advertenties
2.3 Technical data
Cutting depth
Roller diameter
Saw band width
Saw band length
Saw band gauge max.
Band pivoting
Idling speed
Cutting speed when idle
Hose connector diameter
Weight without mains cable
Universal motor with radio and television
interference
Input power continuous operation
Current at nominal load
2.4 Emissions
The declared noise emission values have been measured in accordance with DIN EN 62841-1 and may be used
for comparing the tool Z5 Ec (Z4 Ec) with another and also in a preliminary assessment of exposure.
2.4.1
Noise emission specifications
Noise emission values determined according to EN 62841:
Idling
The noise measurements were conducted using the band saw blades included in the delivery specification.
2.4.2
Vibration specifications
The typical hand-arm vibration is less than 2.5 m/s
2.5 Scope of supply
Portable band saw Z 5 Ec complete with:
1 saw band, coarse 8 mm (5/16 in.), serrated
1 saw band, coarse 6 mm (15/64 in.)
1 saw band, coarse 8 mm (5/16 in.)
1 handle cpl.
1 adapter
1 operating manual
1 folder "Safety Instructions"
Danger
The noise emissions during actual use of the power tool Z5 Ec can differ from the
declared values depending on the ways in which the tool is used especially what kind
of workpiece is processed.
Always wear hearing protection, even when the power tool ist running idle in addition
to the trigger time!
Sound power level
99 dB (A)
305 mm (12 in.)
205 mm (8 1/16 in.)
6 - 8 mm (15/64 – 5/16 in.)
1752 mm (69 in.)
0.65 mm (1/32 in.)
30°
1550 - 650 rpm
16.6 – 6.9 m/s (54.4 – 22.6 ft/sec)
35 mm (1 3/8 in.)
13,6 kg (29.9 lbs)
230 V~, 50 Hz
2250 W
10 A
Workplace-related emission value
88 dB (A)
.
2
-16-
Advertenties
Hoofdstukken
Inhoudsopgave
