en Grinder
Requirements
The milk hose with the suction
¡
pipe is connected to the milk sys-
tem.
The suction pipe is immersed in
¡
milk.
Place a glass underneath the
1.
beverage outlet.
Press "Classic".
2.
Select and press the beverage
3.
symbol for latte macchiato.
To change the strength, press .
‒
To change the per-cup quantity,
‒
press .
To change the milk ratio, press
‒
.
Press "Start".
4.
To completely stop dispensing
‒
the beverage, press "Stop".
To only stop the current dis-
‒
pensing step, press "Skip".
After preparing the beverage, the
milk system will automatically
clean itself with a short jet of
steam.
The beverage is prepared and
a
then runs into the glass.
Notes
If you do not change any settings
¡
for approx. 30 seconds, the appli-
ance will exit settings mode.
The appliance saves the settings
¡
automatically.
Tips
You can also pre-heat cups before
¡
dispensing using hot water or the
1
cup heater
.
You can also use plant-based al-
¡
ternatives to milk, e.g. soya milk.
The quality of the milk froth de-
¡
pends on the type of milk or plant-
based alternative used.
1
Depending on the appliance specifications
48
7.6 Dispensing two cups at
once
Depending on your beverage, you
can make 2 cups at the same time.
Note: If the "doubleShot" or
"tripleShot" function is active, the
function for dispensing two cups at
once is not possible.
Press the symbol for your desired
1.
drink.
Press
.
2.
The display shows the setting
a
Place two cups on the left and
3.
right underneath the beverage out-
let.
Press "Start".
4.
The drink is prepared in 2 steps.
The beans are ground in 2 grind-
ing operations.
The beverage is brewed and then
a
runs into the cups.
Wait until the process is complete.
5.
Grinder
8 Grinder
Your appliance has an adjustable
Grinder
grinder, which you can use to cus-
tomise the grinding level of your cof-
fee beans.
8.1 Adjusting the grinding
level
Set the desired grinding level while
the coffee beans are being ground.
WARNING
Risk of injury!
The grinder rotates.
Never reach into the grinder.
▶
.