Inhoudsopgave
Advertenties
3.
Wipe off the appliance with a damp cloth.
DE
4.
Place the appliance on a level, solid and dry surface with sufficient clearance
on all sides.
EN
5.
Plug the power cord into an electrical outlet. A short signal tone sounds and
FR
"Lo" appears in the display (model 58175 only on the left side!), the appliance
is in stand-by-mode.
NL
OPERATION OF THE INDUCTION BURNER
IT
Note: Your new burner is equipped with sensor buttons. All settings can be made
ES
with a light touch of the finger. Please do not operate the sensor buttons with wet
PL
fingers, and ensure that you do not place any objects on the buttons, in order to
avoid malfunctions.
1.
Plug the power plug into an electrical outlet use the EIN/AUS button to
switch on the appliance.
2.
A brief signal tone will sound and the display shows ----.
3.
Caution: If you do not make any additional settings on the appliance within
one minute, the appliance enters the stand-by mode
4.
You can control the appliance either by power or by temperature. Press the
"FUNKTION" button to switch between the two modes. The power level
or temperature level can be changed at any time while you are cooking
by pressing the "+" or "-" buttons. The basic setting for the appliance is
1,200 watt.
5.
Place a suitable pot with food to be cooked in the middle of the burner.
Control via heating power
6.
Press the "FUNKTION" button once. The "Watt" indicator lamp lights up.
The power level will be shown in the display. Use the "+" and "-" buttons
to change the power level.
7.
The following settings are possible:
Model
58105
200 W
400 W
600 W
800 W
1000 W
1200 W
26 von 92
Copyright UNOLD AG | www.unold.de
Model 58175
Left
Right
500 W
500
800 W
800
1.200 W 1.000 W
1.500 W 1.200 W
1.800 W 1.300 W
2.000 W 1.500 W
Stand 1.3.2023
Advertenties
Inhoudsopgave
