Inhoudsopgave
Advertenties
•
Safety gloves;
•
Safety clothing for the entire body;
•
Safety shoes with good ankle support and toe protection.
2.5
Safety regulations with respect to the equipment
•
Do not throw the jack.
•
Ensure that the jack cannot fall from its place of storage or use.
•
Never allow the load to drop on the jack. Avoid shock loads at all times.
•
Do not lengthen the lever. The length of the lever was selected to prevent overloading of the jack in
normal use.
•
Use only the prescribed parts in order to prevent damage to the jack.
2.6
Safety regulations with respect to the operation of the system
•
Make a risk assessment of the procedure before you start work (EN 14121).
•
Keep bystanders at a distance and be extra careful in the vicinity of people and animals.
•
Make sure the work area is clearly laid out and has good lighting.
•
Avoid stress and work in a structured way. This reduces the risk of errors, combinations of dangers
and accidents.
•
Before use, check the equipment for damage. Do not use the equipment if it is not in good
condition, and consult your Holmatro dealer.
•
During operation, never get between the object and the equipment.
•
Monitor the situation of the equipment and the structure continually while using the equipment.
•
Use only genuine Holmatro accessories and ensure that they have been attached correctly.
•
Make sure that parts of the body never come between moving parts. There is a risk that parts of the
body may be crushed or cut.
•
Stop immediately if the system makes strange noises or displays aberrant behaviour.
2.7
Safety regulations with respect to maintenance
•
Wear personal means of protection when performing maintenance tasks.
•
Never work in a way that could jeopardize safety.
•
Make sure that the equipment cannot roll away or tip over. The control and drive must be switched
off and safeguarded against unexpected activation.
•
Make sure that moving parts do not move unexpectedly.
•
Used or leaked fluids, and any other products consumed during the activities, must be collected and
disposed of in a environmentally responsible way.
3
Description
3.1
Equipment
The jack is manually operated. The strength of the jack allows it to continue operating under poor
working conditions. The jack is extremely suitable for use at locations where welding is performed (due
to the lack of seals) and can even be used under water.
The jack is self-locking and the load can not lower unintentionally. This minimizes the associated risks.
But caution remains necessary due to the enormous loads to be relocated.
JJ/PL
All manuals and user guides at all-guides.com
917.219.005_005
EN
21
Advertenties
Inhoudsopgave
