Inhoudsopgave
Advertenties
Problem and alarm code
The appliance trips the circuit-beak‐
er.
Once you have checked the appliance,
deactivate and activate the appliance. If the
problem occurs again, contact an Authorised
Service Centre.
11.1 Dishwashing and drying results are not satisfactory
Problem
Poor washing results.
Poor drying results.
Whitish streaks or bluish
layers on glasses and
dishes.
Stains and dry water
drops on glasses and
dishes.
The interior of the appli‐
ance is wet.
Unusual foam during
washing.
Possible cause and solution
•
The amperage is insufficient to supply simultaneously all the applian‐
ces in use. Check the socket amperage and the capacity of the meter
or turn off one of the appliances in use.
•
Internal electrical fault of the appliance. Contact an Authorised Service
Centre.
Possible cause and solution
•
Refer to Daily use, Hints and tips and to the basket loading leaflet.
•
Use more intensive washing programme.
•
Activate the option ExtraPower to improve the washing results of a selected pro‐
gramme.
•
Clean spray arm jets and filters. Refer to Care and cleaning.
•
Tableware was left for too long inside the closed appliance. Activate AirDry to set
the automatic opening of the door and to improve the drying performance.
•
There is no rinse aid or the dosage is not sufficient. Fill the rinse aid dispenser or
set the dosage to a higher level.
•
The quality of the rinse aid can be the cause.
•
Always use rinse aid, even with multi-tablets.
•
Plastic items may need to be towel dried.
•
The programme does not have the drying phase. Refer to the programme table.
•
The released quantity of rinse aid is too high. Adjust the dosage to a lower level.
•
The quantity of detergent is too high.
•
The released quantity of rinse aid is not sufficient. Adjust the dosage to a higher
level.
•
The quality of the rinse aid can be the cause.
•
This is not a defect of the appliance. Humidity condensates on the appliance
walls.
•
Use the detergent designed specifically for dishwashers.
•
Use a detergent from a different manufacturer.
•
Do not pre-rinse dishes under running water.
WARNING!
We do not recommend using the
appliance until the problem has been
completely fixed. Unplug the appliance
and do not plug it in again until you are
certain that it operates correctly.
ENGLISH
45
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
