Inhoudsopgave
Advertenties
Cargo Floor B.V.
P.O. Box 271
NL-7740 AG Coevorden
Phone:
+31-(0)524- 593900
Fax:
+31-(0)524- 593999
System operation
System control
Operation control
Bore (mm)
Piston rod diameter (mm)
Stroke (mm)
Cylinder volume (ltr.)
Oil volume per cycle (ltr.)
Over pressure valve threshold, max. operational pressure (bar)
Strokes per minute with advised pump capacity
Speed (mtr. / min) with advised pump capacity
Advised pump capacity:
Flow (ltr./min)
Pressure (bar)
Max. pump capacity:
Flow (ltr./min)
Pressure (bar)
Speed at maximum pump capacity (mtr. / min.)
Control valves
Throughput variation
Drive
Filter
Pressure piping
Return piping
Oil ISO VG 32 b.v.
Biological oil
Oil temperature
Floor
Aluminium floor profiles :
Extrusion alloy
Guiding
Guide bearing surface
Under floor
www.cargofloor.com
info@cargofloor.com
GB
CARGO FLOOR TECHNICAL SPECIFICATIONS
:
completely hydraulic, with three double-action cylinders.
:
completely hydraulic mechanical.
:
fully automatic loading – stop - unloading.
: 24V DC
: Completely variable speed by use of oil flow determined by the revs of the motor
or by various pumps. Pay attention to the diameter of the choke, see page 25.
: use of the PTO/pump on the truck; an electro-hydraulic aggregate or an hydraulic
aggregate with an external combustion engine.
: pressure filter type: high-pressure 10 micron (part number7372005).
: Ø 20 x 2 feed through 16 mm
: Ø 25 x 2,5 feed through 20 mm
: Shell Tellus T32 or BP HL2-32 or ESSO Univis 32 (or equivalent).
Only use biological oil after agreement by Cargo Floor
: A biological oil of the type synthetic ester (HEES) can be used as standard with
the Cargo Floor system. We advise you not to use other types of biological oil.
: max. 70 ° C
- plank length negotiable
- floor thickness 3, 6, 8, 10, HDI 8/18 mm. HD 8/20 mm; Semi Leak Proof.
- profile width 111,9 mm / double seal profile 114,8 mm
- moving floor width standard 2.355 mm for an inner width of 2.500 mm
: high quality Aluminium-alloy, weldable, very wear-proof and tensile
: The aluminium floor profiles are borne by wear-free plastic guides (TWISTER) or
by plastic guide cams. See figure 13A , page 29.
: the total bearing surface of each guide (TWISTER) is 87 cm
Total bearing surface of each guiding block of the plastic cam guide is 60
2.
cm
Total guide surface area is determined by the total number of guides,
which can be varied as required.
: Steel as well as aluminium. The plastic guiding can be provided with square tubes
25x25x2 or the plastic cam guides can be mounted directly on the under floor.
CF500 SL-2
CF100 SL-2
100
45
200
2.82
8.46
225
13
2.6
110
250
130
250
3,1
2
2012 Cargo Floor B.V. Coevorden, Holland
Versie 01/11-01-2012
Blz. 68
80
35
150
1.36
4.09
175
17
2.6
70
200
80
200
2.9
Advertenties
Inhoudsopgave
