Inhoudsopgave
Advertenties
3. Press
current setting of the rinse aid dispenser.
•
= rinse aid dispenser deactivated.
•
= rinse aid dispenser activated
4. Press
5. Press on/off button to deactivate the appliance and to confirm the setting.
BEFORE FIRST USE
1. Make sure that the current level of the
water softener agrees with the hardness
of the water supply. If not, adjust the level
of the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container with special salt for
dishwasher.
ADDING SALT
Before first use put one litre of water in the salt container.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after
you fill the salt container, start a programme.
ADDING RINSE AID
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot
rinse phase.
DAILY USE
1. Open the water tap.
2. Set the correct programme for the type of load
and the degree of soil.
24
.
and
go off.
to change the setting.
2
1
continues to flash. The display shows the
3. Fill the rinse aid dispenser with special rinse
aid for dishwasher.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance.
Do not use detergent and do not load the
baskets.
Make sure that the appliance is in Programme
selection mode.
1
2
Advertenties
Inhoudsopgave
