Compliance with the Control of Noise at Work Regulations
The Control of Noise at Work Regulations 2005 (the
came into force for all industry sectors in Great Britain on 6 April 2006. The
Control of Noise at Work Regulations 2005 replaces the Noise at Work
Regulations 1989.
The aim of the Noise Regulations is to ensure that workers' hearing is
protected from excessive noise at their place of work, which could cause
them to lose their hearing and/or to suffer from tinnitus (permanent ringing
in the ears).
The level at which employers must provide hearing protection and hearing
protection zones is now 85 decibels (daily or weekly average exposure) and
the level at which employers must assess the risk to workers' health and
provide them with information and training is now 80 decibels. There is also
an exposure limit value of 87 decibels, taking account of any reduction in
exposure provided by hearing protection, above which workers must not be
exposed.
To help you calculate your workers' exposure, Ultrawave publish the noise
generated by your ultrasonic cleaner on the Certificate of Test. The figure is
that experienced by a worker standing in the operating position.
The full text of the
text of the
Noise at Work Regulations 1989
Guidance on the 2005 Regulations can be found in the free HSE leaflet
at Work'(INDG362 (rev 2)
Work' (L108) (ISBN 0 7176 6164 4) available from
bookshops.
[1]
http://www.hse.gov.uk/noise/regulations.htm
http://www.opsi.gov.uk/si/si2005/20051643.htm
[2]
[3]
https://www.hse.gov.uk/noise/regulations.htm
https://www.hse.gov.uk/pubns/indg362.pdf
[4]
https://www.hse.gov.uk/pubns/books/l108.htm
[5]
The Great Britain noise regulations are based on the
Directive
requiring similar basic laws throughout the EU.
Q-Series Operating Manual
Control of Noise at Work Regulations 2005
[4]
and in HSE's priced book 'Controlling Noise at
[3]
can be viewed online.
EU Environmental Noise
36
Noise Regulations
and the full
[2]
HSE Books
or from
[5]
C6012106
)
[1]
'Noise