Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
When the Q-Series power is turned on and the liquid level is too low, the
following screen will display.
The level sensor can be disabled for specialist cleaning applications where
deionised (DI) water is used (see page 21).
When the bath is filled with liquid to the correct level, you will be given the
option to degas. (The need for degassing is explained on page 27).
You will need to degas the liquid to ensure good cleaning efficacy.
By choosing YES, your Q-Series ultrasonic bath will run an automatic de-gas
cycle. The following screen will display.
The degassing process is to remove all bubbles from the water as these
impede the cleaning performance. Once all the bubbles have come to the
surface, complete the degassing cycle by pressing the key.
Note: If the machine detects low liquid level for more than 5 seconds, it is
assumed that the bath has been filled with fresh water, and you will be given
the option of running another degas cycle.
Q-Series Operating Manual
9
C6012106
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
