Inhoudsopgave
Advertenties
Screen 1: Setting the temperature
Your Q-Series is fitted with a thermostat and heaters to ensure the
temperature of the cleaning liquid is maintained at the set temperature.
Use the UP and DOWN keys to accurately set the desired temperature of the
cleaning liquid between 5°C and 70°C.
During normal use, the water heaters in your Q-Series ultrasonic bath will
switch on if the cleaning liquid temperature is lower than the set
temperature.
[As a safety feature, the heaters and ultrasonics in your Q-Series ultrasonic
bath will only operate when the bath is full of liquid.]
Please note that during normal operation, ultrasonic energy will heat the
cleaning liquid by up to 15°C per hour.
Your Q-Series ultrasonic bath cannot cool the cleaning liquid. If the liquid
temperature becomes too hot, you must either let it cool down, or refill the
bath with cooler water.
When the correct temperature is selected, use the MENU key to move to the
next screen.
SAFETY NOTICE: When the temperature is set to 54°C or above, the case of
the Q-Series will become hot and care should be taken when touching the
case.
A risk assessment should be conducted – see BS EN ISO 13732-1:2008 for full
details
When the desired temperature has been selected, use the MENU key to
move to the next screen.
Q-Series Operating Manual
11
C6012106
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
