Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Recording the data
System Requirements:
-
Windows 2000 SP4; XP SP2; Vista SP2' 7
-
Microsoft Excel
-
Mac OS 10.1.2+
-
USB High Speed Hub Port (500mA)
-
One available USB port
To record the saved data (excluding the QSx variants):
Always ensure the memory card is inserted into the Q-Series prior to turning
the power on.
The results of each cycle will be saved to the card until the card is removed.
Once you are ready to record the information, remove the Memory card
from the Q-Series ultrasonic bath. Insert the supplied memory to USB card
reader into a USB port on the PC and insert the memory card into the
relevant port on the card reader.
There is a file on the memory card which is already set up to provide a
template for recording the data – Ultrawave.xls. Open this file and the data
will display in spreadsheet format.
The file will show information of every cycle run while the memory card has
been in place in the Q-Series ultrasonic bath.
To ensure that the next cycle information is recorded on the memory card,
switch off the Q-Series and reinsert the card before switching the bath on
again.
The data will only be saved to the card, if it is inserted before the machine is
switched on. If the Memory card is inserted when the Q-Series is already
switched on, the data will not be recorded.
Q-Series Operating Manual
25
C6012106
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
