Advertenties
Collector
1. Grasp the centre or both outer webs
with your fingers and carefully lift out
the collector for liquids 17 upwards.
2. Drain the liquid.
3. Rinse the collector 17 under warm dish-
water or place it in the dishwasher.
Make sure it is dry before inserting it.
4. Insert the collector from the top into the
device.
Sealing ring
1. Grasp the sealing ring 16 with two fin-
gers and lift it off upwards.
2. Rinse the sealing ring 16 under warm
dishwater. Make sure it is dry before in-
serting it.
3. Replace the sealing ring in the respec-
tive form of the device. Ensure that it is
in continuous contact without any
waves.
NOTE: the sealing ring 16 is a wearing
part. Due to the high contact pressure, it will
lose its shape over time. In this case, replace
it with a new one (included in the items sup-
plied).
9.2
Storage
WARNING! Risk of material damage!
During storage, the lid 11 must not be
locked, but only loosely closed. Perma-
nent locking could damage sealing
rings 10 and 16.
•
Figure C: wind the power cable 6
around the cable spool 18 at the un-
derside of the device.
•
Store the device protected against dust
and dirt and out of the reach of chil-
dren.
10. Disposal
This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances. Re-
cycling helps to reduce the consumption of
raw materials and protect the environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental reg-
ulations applicable in your country.
9
GB
Advertenties
