2.6 Service
• To repair the appliance contact the
Authorised Service Centre. Use only
original spare parts.
• Please note that self-repair or non-
professional repair can have safety
consequences and might void the
guarantee.
• The following spare parts are available for
at least 7 years after the model has been
discontinued: thermostats, temperature
sensors, printed circuit boards, light
sources, door handles, door hinges, trays
and baskets. Door gaskets are available
for at least 10 years after the model has
been discontinued. The duration may be
longer in your country. For further
information, please visit our website.
• Please note that some of these spare
parts are only available to professional
repairers, and that not all spare parts are
relevant for all models.
3. CONTROL PANEL
1
2
7
1. Fridge temperature indicator LED
2. Freezer temperature indicator LED
3. Frostmatic indicator
4. Fridge compartment indicator
5. Freezer compartment indicator
6. ON/OFF button
Compartment selection button
7. Frostmatic button
Temperature regulator
3.1 Switching on/off
Switching on
1. Insert the plug into the wall socket.
2. Press the ON/OFF button if all LED
indicators are off.
Switching off
3 4 5
6
2.7 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the mains
supply.
• Cut off the mains cable and discard it.
• Remove the door to prevent children and
pets to be closed inside of the appliance.
• The refrigerant circuit and the insulation
materials of this appliance are ozone-
friendly.
• The insulation foam contains flammable
gas. Contact your municipal authority for
information on how to discard the
appliance correctly.
• Do not cause damage to the part of the
cooling unit that is near the heat
exchanger.
Keep touching the ON/OFF button for 3 sec.
All indicators light off.
3.2 Temperature regulation
Before regulating the temperature, select the
compartment.
To select the freezer compartment press the
compartment selection button until LED
corresponding to the lower cavity lights up.
The temperature LED indicator shows the
latest set temperature. Recommended setting
is -18°C.
To select the fridge compartment press the
compartment selection button until LED
corresponding to the upper cavity lights up.
The temperature LED indicator shows the
latest set temperature. Recommended setting
is 4°C.
To set temperature:
1. Press temperature regulator button.
Current temperature indicator blinks.
2. When you press the temperature
regulator, the setting moves by one
position. When you select a temperature,
ENGLISH
21