Würth ESI 160 Vertaling Van De Originele Gebruiksaanwijzing pagina 25
Verberg thumbnails
Zie ook voor ESI 160:
- Vertaling van de originele gebruiksaanwijzing (241 pagina's)
Advertenties
Striking an arc ("Lift Arc")
▸
Briefly touch the workpiece with the electrode
tip at the point to be welded and slightly lift the
electrode tip : The arc burns between workpiece
and electrode.
Oxidised tungsten electrodes (thorium oxide, e.g.
electrode WT 20, or cerium oxide WC 20) ignite
more easily and have higher current loads than
electrodes of pure tungsten. Electrodes of oxidised
tungsten are generally used for DC welding.
Attention !
If the welding current is too low, no arc can be
drawn; if the welding current is too high, the tung-
sten electrode melts.
Indicative values for welding cur-
rents and gas flow rates
Tungsten
Welding cur-
electrode
rent [A]
dia. [mm]
1.0
1.6
70 – 150
2.4
150 – 250
3.2
140 – 320
Depending on the operating mode selected, different ancillary parameters are available:
Code
Parameter
AEd
Welding end detection (%)
dAF
Arc force (%)
Sbt
Auto standby time (min)
StE
Hot start (%)
Start current (%)
Stt
Hot start time (s)
Start current time (s)
rEd
Display version number
rEL
Master version number
Gas flow rate
[l/min]
15 - 80
4
5 – 6
6 – 7
6 – 8
Standard value Adjustment range
Call ancillary parameters
▸
Select the required operating mode with the
button [14].
The LED [11], [12] or [13] lights up.
3
▸
Press the button [14] for 2 seconds.
The parameter code and the corresponding set
3
value are indicated in the 7-segment display [7].
▸
Select the desired ancillary parameter by turning
the rotary knob [10].
The set value flashes in the 7-segment display [7].
3
▸
Set the required value by turning the control
knob [10].
▸
Confirm the set value by pressing the control
knob [10].
▸
Select the next ancillary parameter [10] by
turning the rotary knob orexit the ancillary param-
eters by pressing the button [14].
100
0-200
100
0-200
30
Off, 5-30
125
5-200
50
5-200
1
0.1
-
-
CEL
0-20
0-20
-
-
Mode
MMA
TIG
25
Advertenties
