Instant use / adjust manually
Easy use / manual adjustment
Once you plug the Wartmann air fryer into the soc-
ket, it enters 'standby' mode. You will hear a loud
beep, the display briefly lights up, and the 'power'
button turns red. The display shows 'OFF'. Press the
'power' button. You will hear another loud beep, and
the interior light turns on for 20 seconds. The 'power'
button continues to blink. The display alternates bet-
ween showing the time and temperature. The default
setting is 200 degrees Celsius and 18 minutes.
To start the standard program immediately (18
minutes at 200°C), touch the 'power' button. You will
hear the fan running. The display alternates between
showing the temperature and the countdown of time
remaining. The Wartmann air fryer will automati-
cally complete this program. At the end of the pro-
gram, you will hear 5 loud beeps. The display shows
'OFF', and the fan continues to run briefly. Then, the
Wartmann air fryer goes into standby mode.
You can adjust the time (interval 1 minute) and
temperature (interval 10 degrees) as desired using
the '+' and '-' buttons. This can also be done
during operation. Touch the 'lighting' button to turn
the light on or off. The light stays on for 20 seconds
each time. This allows you to monitor and adjust the
cooking process effectively. Press the 'power' but-
ton to turn off the air fryer. The fan continues to run
briefly. The air fryer enters the standby mode.
Selecting the cooking program
The Wartmann air fryer features 10 preset cooking
programs (see figure 2). These programs have
pre-set times and temperatures tailored for specific
foods. The following programs are available:
French fries, egg tart (puff pastry), pizza, cake,
fruit (vegetables), chicken wings, chicken legs, meat
(steak), shrimp, and fish. Please refer to Attachment
1 for an overview of the cooking programs and
recommendations, regarding maximum filling weight
9