Inhoudsopgave
Advertenties
It is recommended to prepare the food for grinding by cutting it into cubes with an edge of approx. 3 cm.
The kneading stirrer can be used to prepare dough, e.g. for bread or pizza.
The whisker disc can be used to whisk egg white foam, whipped cream or to prepare creams. Do not use the whisker disc to
prepare hard food such as ice cubes. The disc may crack when in contact with hard food.
When using the grater, do not press too hard on the grated food. Only the pusher should be used to press food. Do not use hands,
fi ngers, cutlery or any other objects for this purpose. They can be caught by the grater and lead to damage to the appliance, as
well as injuries.
The blender cup can be used to prepare drinks, juices, sauces, mix food, e.g. for children and mix soft food ingredients. During
operation, the cup should always be covered with a lid. If it is necessary to add ingredients during food preparation, use the
opening in the lid.
In the case of large ingredients, they should be divided into smaller portions, and if this is not possible, they should be placed in
the cup before turning the appliance on, then the lid should be mounted and the appliance turned on. Do not remove the cup lid
while the blender is running.
Do not use the blender to crush ice or frozen food. It is not recommended to use the blender for longer than 3 minutes.
When using the blender, the ingredients should be added to the cup through the opening in the lid to minimise the cup content spillage.
Do not place too much food in the mill container. It is recommended to divide the food to be ground into several portions and to
grind each portion separately. If there is too much food in the mill container, the grinding can take a very long time and result in
uneven grinding results.
MAINTENANCE AND STORAGE
CAUTION! Never immerse the drive housing in water or other liquids. The drive housing must also never be exposed to jets of
water or other liquids. Doing so may result in electric shock.
Other parts and accessories can be washed under running water or in dishwashers. The temperature of water during washing
must not exceed 60
C. This should be taken into account when selecting the dishwasher programme. When using a dishwasher,
O
expect faster matting of plastic surfaces. Washing parts with elastic seals in the dishwasher (mill base and blender cup) can lead
to faster wear of the seals. It is recommended to clean these parts under running water.
Care must be taken to avoid injury when manually cleaning parts with sharp edges. Brushes and protective gloves are recom-
mended.
Turn the appliance off after fi nishing work, wait for the rotating parts to stop completely, unplug the power cord from the socket,
disassemble the device, empty its contents, and proceed with maintenance.
Parts of the appliance which have been in contact with food should be cleaned immediately after use. Dried food residues can clog
the stirrers and blades, which can lead to a loss of performance of the appliance or even its damage. If this happens, immerse
these parts which were described as immersible in warm water with dishwashing liquid and leave it to soak, then clean with a soft
sponge or a brush and water with dishwashing liquid. Clean the appliance housing and the outer surfaces of the cup with a soft
cloth dampened with a water and mild detergent solution. Wipe dry. Do not use abrasive cleaning agents.
CAUTION! Due to the sharp edges of the blades, avoid hand contact with the blades during cleaning. The blades can cut both skin
and kitchen gloves made of synthetic material. The blades should be washed with a brush or sponge.
Make sure all parts are cleaned and dried before connecting the appliance to the power supply. Store the product in dry, shaded
conditions. Protect the storage place from unauthorised access, especially by children. It is recommended to store the product
in the unit packaging provided with the product. The drive housing has a drawer which can be used to store small accessories of
the food processor.
TECHNICAL PARAMETERS
Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Electrical protection class
Mixer bowl capacity
Cup capacity
Mill container capacity
External dimensions of the appliance prepared to work as a mixer (W x D x H)
External dimensions of the appliance prepared to work as a blender (W x D x H)
External dimensions of the appliance prepared to work as a mill (W x D x H)
Drive housing weight
O R I G I N A L
GB
Units
[V~]
[Hz]
[W]
[l]
[l]
[I]
[mm]
[mm]
[mm]
[kg]
I N S T R U C T I O N S
Value
67950
220 – 240
50/60
550
II
1.2
1.5
0.5
210 x 240 x 420
180 x 190 x 420
185 x 190 x 340
1.8
15
Advertenties
Inhoudsopgave
