Inhoudsopgave
Advertenties
Clean the housing
soft cloth. You can also use a mild washing-up
liquid to remove stubborn dirt.
Remove the white sealing ring
pressing tube
. This stops dirt remaining be-
8
tween the walls.
Note: The shaping disks are easier to clean
when the dough has hardened.
Storage
When the pasta machine has been cleaned, pro-
ceed as follows:
If necessary, unplug the mains plug from the
safety socket.
Store the pasta machine in a dry place.
Troubleshooting
Problem
The pasta machine has no power. The plug is not inserted or
The pasta machine is not pressing
out any pasta or „E1" appears in
the LC display
.
2a
with a slightly damp,
2
to clean the
17
Cause
has poor contact.
Not enough liquid
Solution
Clean the plug with a dry cloth
and / or insert this into the socket
(again).
Press the ON / OFF button
off the device. Pour in small quantities
of liquid through the opening in the lid
and press the ON / OFF button
4
to turn the device back on again. Press
the knead button
and allow the
2c
mixture to be kneaded to the desired
consistency. Then press the ON / OFF
button
to switch it off, and then
2b
again to switch it on again, then push
the press out button
2e
whether pasta is being produced.
to switch
2b
2b
and check
GB/IE
29
Advertenties
Hoofdstukken
Inhoudsopgave
