Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
reference table) through the left side of the lid
once the mixing paddle
(see Fig. K). The LC display
maining total manufacturing time. The device
stops automatically and shows „OFF" when it
has finished pressing out pasta. The total pro-
cess is dependent on the respective programme
selected (see Fig. L).
You can use the included dough scraper
similar kitchen utensils to cut the pasta.
Processing left-over dough
If there is left-over dough in the mixing chamber
when the automatic pasta making process
1
has finished, first switch the device off.
Open the lid
and, with your fingers, push
4
the dough towards the opening of the pressing
tube
inside the mixing chamber
8
Close the lid
again.
4
Turn the product on and push the pressing out
button
to press out the remaining dough.
2e
This function takes 5 minutes.
This process can be repeated multiple times.
With sticky doughs and semolina dough, it is
particularly likely that there will be dough left in
the mixing chamber
ATTENTION! Only use this function when
water and flour have been well mixed. It could
otherwise lead to malfunctions which would
have a negative impact on the device's lifespan.
Tips
-
Before they are added to the mixing chamber
, liquids must first be mixed together and
1
whisked in the measuring cup for liquids
-
Do not add any non-liquid ingredients except
flour during processing (eggs must be mixed
with water before use).
-
Only pour vegetable juice and the egg / water
mixture through the opening in the left of the lid
and never directly into the mixing chamber
4
-
Do not pour the egg mixture directly onto the
flour.
-
Add eggs or juice to make pasta with different
aromas.
has started to move
5
shows the re-
2a
14
.
1
.
1
11
-
Dust the pastas with a little flour when they
have come out. This gives them more bite and
stops them from sticking together so easily.
Program list
Automatic function „1 cup flour"
or
In standby-mode, press the automatic button
„1 cup flour" to select to make pasta using
2d
one cup of flour. The buzzer will sound and a
digital countdown from „9:00" minutes of pro-
cessing time will show in the LC display
The device will knead anticlockwise for 2 minutes
then pause for 5 seconds. After this, the auto-
matic pressing out function starts. The device
automatically continues alternating between
kneading and pressing out until the end of the
programme. At the end of the processing time,
„OFF" will appear on the display
the dough has already been pressed out before
the end of the 9 minutes, the device can be
switched off. If there is still dough left in the
mixing chamber after the 9 minutes have passed,
follow the instructions in the chapter „Process-
ing left-over dough".
Automatic function „2 cups flour"
In standby-mode, press the automatic button
„2 cups flour" to select to make pasta using
2d
two cups of flour. The buzzer will sound and a
digital countdown from „12:00" minutes of
processing time will show in the LC display
The device will knead anticlockwise for 2 minutes
then pause for 5 seconds. After this, the auto-
matic pressing out function starts. The device
.
automatically continues alternating between
kneading and pressing out until the end of the
programme. At the end of the processing time,
„OFF" will appear on the LC display. If all of
the dough has already been pressed out before
the end of the 12 minutes, the device can be
switched off. If there is still dough left in the
1
mixing chamber after the 12 minutes have
passed, follow the instructions in the chapter
„Processing left-over dough".
.
2a
. If all of
2a
.
2a
GB/IE
27
Advertenties
Hoofdstukken
Inhoudsopgave
