Inhoudsopgave
Advertenties
• Dry the inside of the compartment with a
sponge or a clean cloth.
• To accelerate the defrosting process,
place one or more bowls of warm water
in the freezer compartment.
• Examine the contents when replacing
them in the freezer and if some of the
packages have thawed out, they should
be eaten within 24 hours, or be cooked
and re-frozen.
• After defrosting is complete, clean the
inside of the appliance with a solution of
warm water and a little bicarbonate of
soda, then dry thoroughly. Wash all
removable parts in the same way and
reassemble. Reconnect the appliance to
the mains supply and leave for 2 to
3 hours on setting number MAX before
introducing the food back into the freezer.
5.2 Replacing the Light Bulb
Important note: Unplug the unit from
the power supply before start the
process.
Images are representative
1
3
1. If available, remove the screw on the
light cover by screw driver. (Fig.1)
2
5
4
EN - 18
2. Press the hooks on light cover. (Fig. 2)
3. Open the light cover towards arrow when
top hooks pull out from housing. (Fig. 3)
4. Pull out the cover towards arrow remove
it. (Fig. 4)
5. Turn the light bulb counter clockwise and
remove it. (Fig. 5)
6. Change the present light bulb with a new
one of not more than 15 W. (Fig. 5)
7. Implement the steps in reverse order.
8. After waiting 5 minutes, plug the unit.
Replacing LED Lighting
To replace any of the LEDs, please contact
the nearest Authorised Service Centre.
Note: The numbers and location of the
LED strips may change according to
the model.
6 SHIPMENT AND
REPOSITIONING
6.1 Transportation and Changing
Positioning
• The original packaging and foam may be
kept for re-transportation (optional).
• Fasten your appliance with thick
packaging, bands or strong cords and
follow the instructions for transportation
on the packaging.
• Remove all movable parts or fix them
into the appliance against shocks
using bands when re-positioning or
transporting.
Always carry your appliance in the
upright position.
7 BEFORE CALLING AFTER-
SALES SERVICE
If you are experiencing a problem with
your appliance, please check the following
before contacting the after-sales service.
Your appliance is not operating
Check if:
• There is power
• The plug is correctly placed in the socket
Advertenties
Hoofdstukken
Inhoudsopgave
