Advertenties
Status
All LEDs show in sequence, followed by one (1) LED showing con-
stantly red.
Technical data
Technical data
The band file is delivered with a short or long file arm as standard. The individual accessory tools are also available as optional accessories and
are compatible with every as-delivered version of the power tool.
Weight in accordance with EPTA Procedure 01, without battery B22
Rated voltage
Belt speed
Belt dimensions, short file arm (L × W)
Belt dimensions, long file arm (L × W)
Ambient temperature for operation
Storage temperature
Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a standardized test and can be used to
compare one power tool with another. They can also be used for a preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for different applications, with different
accessory tools, or is poorly maintained, the data can vary. This can significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or when it is running but not actually
being used for a job. This can significantly reduce exposure over the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for example: maintaining the power tool
and accessory tools, keeping the hands warm, organization of work patterns.
Noise information
Emission sound pressure level (L
Uncertainty for the sound pressure level (K
Sound power level (L
)
WA
Uncertainty for the sound power level (K
Vibration information
Triaxial vibration value (a
h
Uncertainty (K)
Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶
Before inserting the battery, make sure that the product is switched off.
▶
Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery.
*2327539*
)
pA
)
pA
)
WA
)
14
2327539
Meaning
If a connected product can still be used, the remaining battery ca-
pacity is below 50 %.
If a connected product can no longer be used, the battery has
reached the end of its useful life and has to be replaced. Consult
Hilti Service.
2.3 kg
21.6 V
4.3 m/s ... 9.5 m/s
457 mm × 4 mm ... 30 mm
533 mm × 4 mm ... 30 mm
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
21.6 V
See the end of these operating instructions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
81 dB(A)
3 dB(A)
89 dB(A)
3 dB(A)
B 2255
2.9 m/s²
B 22255
3.2 m/s²
1.5 m/s²
15
Advertenties
