After Using The Appliance - Bosch MSM6 Series Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor MSM6 Series:
- Gebruikershandleiding (80 pagina's) ,
- Gebruiksaanwijzing (74 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en
Dicer
Important information:
– Fruit / vegetables should not be too ripe,
as the juice may escape.
– Leave cooked food to cool down before
dicing it, as it will then be firmer and the
dicing result will be better.
– The length of the cubes can be influ-
enced by increasing or reducing the
pressure on the pusher.
Fig. H
■ Place bowl on a smooth and clean work
surface.
■ Insert the cutting grid into the base
holder. Observe recesses!
■ Undo the catches on the base holder and
insert cutter disc into the base holder.
■ Fasten the catches.
■ Place the dicer under the lid (arrow
on dicer pointing to arrow on lid) and
turn anti-clockwise as far as it will go
(Fig. H-3).
■ Place lid on the bowl and turn all the way
anti-clockwise. Lock on the handle must
be correctly engaged.
■ Place the base unit on the attachment
and lock into position.
■ Insert the mains plug.
■ Hold base unit and multi-function
accessory firmly and switch on appliance
(turbo speed).
■ Place the food to be diced in the feed
tube. If required, apply light pressure
to the pusher. If required, chop up food
beforehand.
■ Release the On button after processing.
Warning!
Empty the bowl before it becomes so full that
the diced food reaches the dicer.
To do this:
■ Turn the lid together with dicer clockwise
and remove.
■ Empty the bowl.
■ Place lid on the bowl again and turn
all the way anti-clockwise. Lock on the
handle must be correctly engaged.
16
All manuals and user guides at all-guides.com
After using the appliance
■ Remove mains plug.
■ Press the release buttons and remove
■ Turn lid clockwise and remove from the
Depending on the tool / insert used:
■ Take hold of the universal blade by the
or
■ Grip the carrier disc by the recessed
■ Turn the carrier disc over and carefully
or
Disassembling dicer:
(Bild I)
■ Turn the dicer clockwise and remove
■ Undo catches and remove cutter disc.
■ Remove remnants from the cutting grid
■ Take cutting grid out of the base holder.
Cleaning
Warning!
Never immerse the lid of the multi-function
accessory in water and do not clean under
flowing water or in the dishwasher. Do not
clean dicer parts in the dishwasher, blades
will become blunt.
■ Wipe lid of the multi-function accessory
■ Bowl, universal blade, carrier disc and
■ Do not wedge plastic parts in the dish-
■ Prerinse all dicer parts under running
If processing e.g. red cabbage or carrots,
the plastic parts will become discoloured by
a red film which can be removed with a few
drops of cooking oil.
the base unit from the attachment.
bowl.
plastic handle and take out.
grips and lift out of the bowl.
press out the insert from the underside
(Fig. G).
from the lid.
using the cutting grid cleaner. Rotate
cleaner head to the corresponding
cutting grid size.
with a damp cloth only.
disc inserts are dishwasher-proof.
washer as they could warp.
water. Clean parts with a brush.
Advertenties
Inhoudsopgave
