Inhoudsopgave
Advertenties
31
30
33
Figure 7.
Turn the machine off.
Open the right side panel.
Unscrew the Locking Nut [27] and remove it from the
Spindle [30].
Place the adapter of spool type S200 [33] on the
spindle [30] making certain the spindle brake pin [31]
is put in the hole in back side of the adapter [33]. The
adapter of spool type S200 can be purchased
separately (see "Accessories" chapter).
Place the spool type S200 [35] on the spindle [30]
making certain that the adapter brake pin [34] is put in
the hole in the back side of the spool.
WARNING
Position the spool type S200 so that it will rotate in a
direction when feeding so as to be de-reeled from bottom
of the spool.
Re-install the locking nut [27]. Make sure that the
locking nut is tightened.
Wire Spool Type B300 Loading
WARNING
Turn off the power source while mounting electrode wire.
31
Figure 8.
Turn the machine off.
Open the right side panel.
Unscrew the Locking Nut [35] and remove it from the
spindle [33].
Place the adapter of spool type B300 [40] on the
spindle [33].Make certain that the spindle brake pin
[34] is put in the hole in the back side of the adapter.
The adapter of spool type B300 can be purchased
separately (see "Accessories" chapter).
Re-install the locking nut [27]. Make sure that the
locking nut is tightened.
English
34
35
27
Rotate the spindle and adapter so the retaining spring
[37] is at the 12 o'clock position.
Place the spool type B300 [39] on the adapter [36].
Set one of the B300 inside cage wires [40] on the slot
[38] in the retaining spring tab [37] and slide the spool
onto the adapter.
Position the spool type B300 so that it will rotate in a
direction when feeding so as to be de-reeled from bottom
of the spool.
30
36
27
37
11
38
37
36
Figure 9.
WARNING
Figure 10.
39
40
37
39
English
Advertenties
Hoofdstukken
Inhoudsopgave
