Inhoudsopgave
Advertenties
Turning on the Appliance
Open the water supply.
Plug in the main plug.
Set the appliance switch to "I".
Unlock the safety lock at the hand-spray
gun by pressing it.
Press the lever on the hand spray gun.
High pressure operation
Warning
The handgun is subjected to a recoil force
when the water jet is discharged. Make sure
that you have a firm footing. Hold the hand-
gun and spray lance firmly.
Power nozzle
The appliance is equipped with the following
nozzles:
Power nozzle, 25° spray angle
– High pressure flat spray (25°) for large
dirt areas
Note
To prevent damage due to too much pres-
sure, always position high pressure ray first
from a greater distance towards object to be
cleaned.
Rotor nozzle (accessory)
– For strong contaminations
Interrupting operation
Release the lever on the handgun.
Note
When the lever of the hand spray gun is re-
leased, the engine continues to run at zero
speed. The water thus circulates within the
pump and gets heated. When the cylinder
head at the pump has reached the maximum
permissible tempertaure (80 °C), the therm-
valve on the pump opens and lets out the hot
water into the open.
Cooling can be hastened while using com-
pressed water from the water supply pipes:
Pull the lever of the hand spray gun for 2
- 3 minutes so that the circulating water
cools down the cylinder head.
Turn off the appliance.
After operating the water using saline water
(sea water), open the hand spray gun and
rinse the appliance for at least 2 - 3 minutes
using tap water.
Release the lever on the handgun.
Set the appliance switch to "0".
Shut off water supply.
Activate hand spray gun until device is
pressure less.
Use the safety catch to secure the hand-
gun lever.
Remove the water inlet hose from the
appliance.
Pull out the mains plug.
Store the hand spray gun and spray pipe
in the accessory mount.
Store the power cord, the HP hose and
the accessories on the appliance.
Maintenance and care
Risk of injury
Always switch off the appliance and pull out
the mains plug before care and maintenance
work.
You can sign with your dealer a contract for
regular safety inspection or even sign a
maintenance contract.
Please take advice on this matter.
21
English
Advertenties
Hoofdstukken
Inhoudsopgave
