Inhoudsopgave
Advertenties
Climate Control
Climate Control is an intelligent system that controls the H5i and the ClimateLine to deliver
constant, comfortable temperature and humidity levels during therapy. Designed to prevent
dryness of the nose and mouth, it automatically maintains the temperature and relative humidity
while you sleep.
Climate Control modes
Climate Control Auto
Climate Control Manual
Note: Images depict the US product. Temperatures will be displayed in celsius for all other regions.
Cleaning and maintenance
You should regularly carry out cleaning and maintenance as described in this section.
Daily
Disconnect the air tubing and hang it in a clean, dry place until next use.
Weekly
1. Remove the air tubing from the H5i and the mask.
2. Wash the air tubing in warm water using mild detergent.
3. Rinse thoroughly, hang and allow to dry out of direct sunlight.
4. Before next use, reconnect the air tubing to the air outlet and mask.
2
The recommended (default) setting for Climate Control is Auto mode. In
Auto mode, you have the ability to adjust air temperature (61-86°F (16-30°C))
depending on preference. Based on your selected air temperature, Climate
Control automatically adjusts the humidifier output to maintain a constant,
comfortable humidity level of 80% relative humidity while protecting against
rainout. In Auto mode the default air temperature is set to 80°F (27°C).
If enabled by the clinician, Climate Control can also be set to
Manual. In this mode, air temperature and humidity can be
set independently, providing you greater flexibility but without
the rainout protection guaranteed in Auto mode. In this mode,
air temperature (61–86°F (16–30°C)) and humidity level (0–6)
can be set independently. If rainout occurs, either increase air
temperature or decrease the humidity setting.
Advertenties
Inhoudsopgave
