Inhoudsopgave
Advertenties
Fault code
Poor cutting results
Cutting time with fully charged
battery too short
Operating mode cannot be
selected
In case of further faults or inquiries please contact your local dealer.
Type / Model
year of construction
Idle speed n
/ n
0
max
Cutting diameter with thread spool
Thread diameter / thread length
Cutting diameter with cutting blade
Blade thickness
Sound pressure level L
PA
Measuring uncertainty K
pA
measured sound power level L
Measuring uncertainty K
WA
(according to regulation 2000/14/EC)
guaranteed sound power level L
(according to regulation 2000/14/EC)
Hand arm vibration (measured as per ISO 22867)
Measuring uncertainty K
Weight (without battery)
Brush cutter
Grass trimmer
Compatible battery voltage
Refer to the respective "Operating instructions" for "Technical specifications" of the batteries and the charger.
26
Possible Cause
Grass, weeds, undergrowth too long
Grass, weeds, undergrowth too dense
Foreign material, grass wrapped around
the cutting blade
Cutting blade dull
Cutting thread too short
Rechargeable battery is low
Battery service life exhausted
Economy / normal mode toggle buttons
defective
Technical specifications
WA
wA
Corrective action
Trim in several passes
Reduce the cutting width
Check / clean the cutting blade
Turn the cutting blade over or have it
resharpened or replaced
Replace the cutting thread
Charging the rechargeable battery
Replace the rechargeable battery
Contact the customer service
FC 40-255
see last page
6500 rpm
330 / 380 mm
2,5 mm / ca. 170 mm
255 mm
2.8 mm
82 dB (A)
3 dB (A)
93.4 dB (A)
0.93 dB (A)
96 dB (A)
< 2,0 m/s
2
1,5 m/s
2
≈ 3.6 kg
≈ 3.5 kg
36 V
(max 40 V)
Advertenties
Hoofdstukken
Inhoudsopgave
