Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2.6
ROUTINE MAINTENANCE
The air conditioner that you have purchased has been designed to reduce routine maintenance operations to a minimum. These
operations involve solely the cleaning operations outlined below:
-
Cleaning or washing of the ambient air filter every 2 weeks or every time the relative red LED lights up (this can be done by the
user, see user manual).
-
Cleaning of the condensing battery and cleaning of the condensate management system. These operations must be carried
out by skilled technicians on a regular basis that will depend on the place of installation and intensity of use. Depending on the
quantity of dirt, the unit can be cleaned dry (by using a battery compressor and bowl and cleaning the fins with a soft brush
taking care not to deform them) or more thoroughly using dedicated detergents.
Before you leave the site of installation you should gather up all packing material and use a damp cloth to remove any traces of
dust that may have deposited on the machine during assembly (fig. 21).
These operations, though certainly not essential, have a beneficial effect as they enhance the professional image of the installer
in the eyes of the client.
To prevent unnecessary calls by the user, before you leave the site of installation it is also a good idea to:
-
Explain the contents of the Instruction Manual to the user.
-
Show the user how to clean the filter.
2.6.1
Cleaning the air filter
OPERATION TO BE PERFORMED WHEN THE MACHINE IS SWITCHED OFF AND THE POWER SUPPLY IS DISCONNECTED.
To ensure effective internal air filtration and satisfactory operation of your air conditioner, the air filter has to be cleaned periodically.
The air filter is at the top of the unit.
Removing the filter:
-
unhook and manually remove the air intake filter acting as indicated in fig.22
-
remove the two supplementary filters from the filter unit
-
wash and dry all the filters
-
refit the filter unit
To deactivate LED A (if on), after having powered and started the appliance, press the micro key positioned on the signal console
(fig. 19 ref. H) with a pointy object for a brief instant. By doing so, the signal related to the filter cleaning requirement is reset.
2
33
UNICO AIR
Advertenties
Hoofdstukken
Inhoudsopgave
