Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Information on standards
Contact us for more information.
6. Commissioning
Inserting batteries
This product complies with the EN 13485 standard for
penetration measurement.
Suitability: S, T (storage, transportation)
Environment: E (transportable thermometer)
Accuracy class: 0.5
Measuring range: -50...+250 °C
According to EN 13485, the measuring instrument
should be checked and calibrated regularly under the
terms of EN 13486 (recommended frequency: yearly).
5. Product description
1
Infrared sensor
2
2-point laser
3
Display
4
Control keys:
[ON]: switches the instrument on
·
·
[OFF]: switches the instrument off
(hold button down)
·
[
]: switches to IR measurement,
carry out IR measurement (hold
button down)
·
[
]: switches to contact
measurement
·
[
/HOLD/MIN/MAX]: Hold reading,
show minimum / maximum value,
sends readings to the mobile Testo
terminal (Bluetooth®)
5
Battery compartment (at the back)
6
Fold-out immersion/penetration
probe, folding out the probe
switches the instrument on
1
Use a slotted screwdriver to undo
the screw on the battery
compartment.
2
Open the battery compartment.
3
Insert batteries (2x type AAA).
Observe the polarity!
4
Close the battery compartment.
5
Tighten the screw.
13
Advertenties
Inhoudsopgave
