Download Inhoudsopgave Inhoud Print deze pagina

Dyson V8 Gebruikershandleiding pagina 37

Verberg thumbnails Zie ook voor V8:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 47
USING YOUR MACHINE
Do not use without the clear bin and filter(s) in place.
Fine dirt such as flour should only be vacuumed in very small amounts.
Do not use the appliance to pick up sharp hard objects, small toys, pins, paper clips,
etc. They may damage the appliance.
When vacuuming, certain carpets may generate small static charges in the clear bin
or wand. These are harmless and are not associated with the mains electricity supply.
To minimise any effect from this, do not put your hand or insert any object into the
clear bin unless you have first emptied it. Clean the clear bin with a damp cloth only.
(See 'Cleaning the clear bin'.)
Use extra care when cleaning on stairs.
Do not rest the appliance on chairs, tables, etc.
Do not press down on the nozzle with excessive force when using the appliance as
this may cause damage.
Do not leave the cleaner head in one place on delicate floors.
On waxed floors, the movement of the cleaner head may create an uneven lustre. If
this happens, wipe with a damp cloth, polish the area with wax, and wait for it to dry.
EMPTYING YOUR CLEAR BIN
Empty as soon as the dirt reaches the MAX level – don't overfill. Using the machine
when the dirt is above the MAX line may cause the dirt to reach the filter and more
3
frequent maintenance will be required.
Ensure that the appliance is disconnected from the charger before emptying the
clear bin. Be careful not to pull the 'ON' trigger.
To make emptying the clear bin easier, it is advisable to remove the wand and
floor tool.
To minimise dust/allergen contact when emptying, cover the clear bin tightly in a dust
proof bag while you empty.
To release the dirt, hold the appliance by the handle, pull the red lever back and lift
upwards to release the cyclone. Continue until the bin base automatically opens and
releases the dirt.
Remove the clear bin carefully from the bag.
Seal the bag tightly and dispose.
To close, push the cyclone downwards until it is in the normal position and manually
close the base of the bin – the base will click when it is securely in place.
CLEANING THE CLEAR BIN
Ensure the appliance is disconnected from the charger before removing the clear
bin. Be careful not to pull the 'ON' trigger.
Remove the wand and floor tool.
To remove the cyclone, hold the appliance by the handle, pull the red lever towards
you and lift upwards until the bin opens, then push in the red button located behind
the cyclone and lift the cyclone out.
1
To detach the clear bin from the appliance, pull back on the red catch located at the
base, slide the clear bin down and carefully remove forwards from the main body.
Clean the clear bin with a damp cloth only.
Do not use detergents, polishes or air fresheners to clean the clear bin.
Do not put the clear bin in a dishwasher.
Ensure the clear bin is completely dry before replacing.
To replace the clear bin, align the tabs on the clear bin with the grooves on the main
body and slide upwards into place until the catch clicks.
Slide the cyclone into the grooves of the main body and push downwards until it is in
its normal position and manually close the base of the bin – the base will click when it
is securely in place.
WASHING THE FILTERS
Your appliance has two washable filters; wash the filters at least once a month
according to the following instructions to maintain performance. More frequent
washing may be required where the user: vacuums fine dust, operates mainly in
'Powerful suction' mode, or uses the machine intensively.
4
WASHING FILTER A
Ensure the appliance is disconnected from the charger before removing the filter. Be
careful not to pull the 'ON' trigger.
Check and wash the filter regularly according to instructions to
maintain performance.
The filter may require more frequent washing if vacuuming fine dust or if used mainly
in 'Powerful suction' mode.
To remove the filter, lift it out of the top of the appliance.
Wash the filter with cold water only.
Run water over the outside of the filter until the water runs clear.
Squeeze and twist with both hands to make sure the excess water is removed.
Leave to dry completely for a minimum of 24 hours.
Do not put any part of your appliance in a dishwasher, washing machine, tumble
dryer, oven, microwave or near a naked flame.
To refit, place the dry filter back into the top of the appliance. Make sure it is seated
properly.
7
WASHING FILTER B
To remove the filter, twist anti-clockwise to the open position and pull away from
the appliance.
Wash the inside of the filter under cold running water, rotating the filter to ensure all
pleats are covered.
Gently tap the filter against the side of the sink several times to remove any debris.
Repeat this process 4-5 times until the filter is clean.
Place the filter upright, with the top of the filter facing upwards, and leave to dry
completely for a minimum of 24 hours.
To refit, return the filter to the open position and twist clockwise until it clicks
into place.
LOOKING FOR BLOCKAGES
The motor will pulse when there is a blockage. Please follow the instructions below to
locate the blockage:
1
4
2
5
8
Ensure that the appliance is disconnected from the charger before looking for
blockages. Be careful not to pull the 'ON' trigger.
Do not operate while checking for blockages. Doing so could result in
personal injury.
Beware of sharp objects when checking for blockages.
To check for blockages in the main body of the appliance, remove the clear bin and
cyclone as per the instructions in the cleaning the clear bin section and remove the
2
blockage. Please consult the 'Stubborn blockages' section of the illustrations for
further guidance.
If you cannot clear an obstruction you may need to remove the brush bar. Use a coin
to unlock the fastener marked with a padlock. Remove the obstruction. Replace
the brush bar and secure it by tightening the fastener. Ensure it is fixed firmly before
operating the appliance.
Your machine has carbon fibre brushes. Take care if coming into contact with them,
as they may cause minor skin irritation. Wash your hands after handling the brushes.
Refit all parts securely before using.
Clearing blockages is not covered by your guarantee.
BLOCKAGES – AUTOMATIC CUT-OUT
Your machine is fitted with an automatic cut-out.
If any part becomes blocked, the machine may automatically cut out.
5
This will happen after the motor pulses a number of times (i.e switches on and off in
quick succession).
Leave to cool down before looking for blockages.
Ensure that the appliance is disconnected from the charger before looking for
blockages. Failure to do so could result in personal injury.
Make sure any blockages are clear and all parts are refitted before using
your machine.
Refit all parts securely before using.
Clearing blockages is not covered by your guarantee.
CHARGING AND STORING
This appliance will switch 'OFF' if the battery temperature is below 3°C (37.4°F). This
is designed to protect the motor and battery. Do not charge the appliance and then
move it to an area with a temperature below 3°C (37.4°F) for storage purposes.
To help prolong battery life, avoid recharging immediately after a full discharge.
Allow to cool for a few minutes.
Avoid using the machine with the battery flush to a surface. This will help it run cooler
and prolong battery run time and life.
BATTERY SAFETY INSTRUCTIONS
If the battery needs replacing, please contact the Dyson Helpline.
3
Use only Dyson chargers for charging this Dyson appliance.
The battery is a sealed unit and under normal circumstances poses no safety
concerns. In the unlikely event that liquid leaks from the battery, do not touch the
liquid and observe the following precautions:
– Skin contact – can cause irritation. Wash with soap and water.
– Inhalation – can cause respiratory irritation. Expose to fresh air and seek
medical advice.
– Eye contact – can cause irritation. Immediately flush eyes thoroughly with water for at
least 15 minutes. Seek medical attention.
– Disposal – wear gloves to handle the battery and dispose of immediately, following
local ordinances or regulations.
CAUTION
The battery used in this machine may present a risk of fire or chemical burn if
mistreated. Do not short contacts, heat above 60°C (140°F) or incinerate. Keep away
from children. Do not disassemble or dispose of in fire.
DISPOSAL INFORMATION
6
Dyson products are made from high grade recyclable materials. Recycle
where possible.
The battery should be removed from the machine before disposal.
Dispose of or recycle the battery in accordance with local ordinances or regulations.
Dispose of the exhausted filter in accordance with local ordinances or regulations.
This symbol indicates that this machine should not be disposed with your general
household waste. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. When this machine has reached the end of its
serviceable life, please take it to a recognised WEEE (Waste Electrical and Electronic
Equipment) collection facility such as your local civic amenity site for recycling. Your
local authority or retailer will be able to advise you of your nearest recycling facility.
DYSON CUSTOMER CARE
After registering your two-year guarantee, your Dyson machine will be covered
for parts and labour (excluding filters), for two years from the date of purchase,
subject to the terms of the guarantee. If you have any queries regarding your Dyson
machine, visit www.dyson.com for online help, general tips and useful information
9
about Dyson.
Alternatively, you can call the Dyson Helpline with your serial number and details of
where and when you bought the machine.
If your Dyson machine needs a repair, call the Dyson Helpline so we can discuss
the available options. If your Dyson machine is under guarantee, and the repair is
covered, it will be repaired at no cost.
LIMITED 2-YEAR GUARANTEE
TERMS AND CONDITIONS OF THE DYSON 2-YEAR LIMITED GUARANTEE ARE SET
OUT BELOW. THE NAME AND ADDRESS DETAILS OF THE DYSON GUARANTOR
FOR YOUR COUNTRY ARE SET OUT ELSEWHERE IN THIS DOCUMENT – PLEASE
REFER TO THE TABLE SETTING OUT THESE DETAILS.
37

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Sv10

Inhoudsopgave