Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7.3. Power supply
• Plugging your myLEDmask into the electrical power supply
Plug the charger into an electrical outlet (100-240V 50Hz) using the specific adaptor suited to your
country (four di erent adaptors are provided).
Remove the charger cord from the neckpiece and from the electrical outlet, and let the mask sit for at least one
hour and a half after each full charging.
Check the state of charge of the LED mask.
When you plug in your LED mask, an indicator light shows the battery's state of charge.
Indicator light
Orange
Green
Note:
Unplug the mask when the green light appears, and let it sit for at least one hour and a half before using.
Your fully charged myLEDmask can then be used for up to six sessions, with one hour pause between each session (see 4.3 Operating
features). To accommodate regular use thereafter, simply recharge the device as needed using the charger cord.
Once your myLEDmask is charged, you must remove the charger cord from the neck piece before using the device.
The device must be unplugged when in use.
8.0
USING THE PRODUCT
No particular skills are needed to use the myLEDmask. It was designed for ease of use thanks to predefined
programs, which minimize the number of steps required.
STEP 1: Prepare your skin for the facial
Clean and dry your face before each session in order to eliminate makeup and impurities.
Refer to step 8 to learn how to clean your myLEDmask
STEP 2: Turn on your myLEDmask
Turn on your mask by pressing the "On" button
The light above Button 1 on the control panel will come on to confirm that the device has been turned on. Phototype 1 is automatically
preselected.
• Connecting your myLEDmask to the lower part of the neckpiece
To operate your myLEDmask, you will need to connect to a 100-240V 50Hz electrical power supply.
The charger must not be used in a humid atmosphere or near a source of water.
Connect the charger cord's jack plug to the lower part of the neckpiece.
State
Charging
Fully charged
found on the control panel in the mask neckpiece.
myLEDmask
User's Manual
User Manual Version No. 800866-EN02
11
Advertenties
Hoofdstukken
Inhoudsopgave
