Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.3. Operating features
• Power supply – Charger: MASCOT charger model number 2116. The use of any other charger is strictly prohibited.
- Voltage: 100 to 240 volts, AC
- Frequency: 50-60Hz
- Intensity: 0.35 A
The charger is sensitive to electrostatic discharges. We recommend that you handle the charger with caution and ensure it is
equipotential. All conductor components should be connected to earth.
• OPTICAL EMISSIONS DELIVERED
- Red LEDs= 630 nm
- Number of red LEDs on face: 122
- Number of red LEDs on neck: 22
• Precise operating characteristics
Explanation of the 3 defined programs
Phototype
Program 1
Phototype 1
(light, pale white, white, fair)
Program 2
Phototype 2
(medium, white to olive, moderate brown)
Program 3
Phototype 3
(brown, dark brown, very dark, black)
5.0
PRODUCT TRANSPORT
Atmospheric conditions: 0°C ≤ 0 ≤ +45°C. The myLEDmask comes in a storage case specially designed for safe transportation.
6.0
STORAGE
The device must be stored in a dry place with no direct sunlight. During storage, humidity must be between 10% and 80% with no
condensation, and the temperature between 0°C and 35°C, with atmospheric pressure ranging from 70 kPa to 106 kPa.
Make sure your myLEDmask is stored in its case when not in use. This will protect it from exposure to light and from potentially damaging
impacts or falls.
7.0
ASSEMBLING THE PRODUCT
7.1. General information
The myLEDmask device is delivered in one piece, already assembled.
Before using it for the first time, it is recommended that you fully charge the mask for at least 3.5 hours using the charger. When the battery
is fully charged, the indicator light on the charger turns green, meaning you must unplug the charger. Let the mask sit for one hour and a
half after each complete charging, and ensure it is unplugged before using.
The device must be unplugged when in use.
To connect the device to the power supply and turn it on, an IEC electrical outlet with two terminals is all that is needed (see 4.2 Device components).
Device settings are adjusted ahead of delivery. There is therefore no need for any calibrations by the user. However, it is important to follow the
instructions in Chapter 8 – Using the Product.
7.2. Attaching the strap
Introduce the strap into the slotted tab on
either side of the mask.
10
User Manual Version No. 800866-EN02
- Infrared LEDs= 850 nm
- Number of infrared LEDs on face: 122
- Number of infrared LEDs on neck: 22
Duration
Battery autonomy
5 min 35
35 min
11 min 10
35 min
13 min 55
35 min
Slide the strap into the plastic loop.
Number of complete programs
6
3
2
Adjust the strap so it fits snugly around
your head.
Advertenties
Hoofdstukken
Inhoudsopgave
