Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Translation of the original instructions
• Never use petrol or flammable solvents to clean the product. Prefer the use of water and, if necessary, non toxic com-
mercial solvents.
• After maintenance, always put and secure the metal covers back on, before switching the machine on.
• The ferrite on inducer can be replaced if damaged.
To replace it, you must :
- Remove the protection,
- Remove the ferrite on copper with a heat gun to facilitate the removal of the resin,
- Clean copper,
- Glue the ferrite with the specific resin,
- Reposition the ferrite with its protection,
- Waiting for the complete setting of the adhesive before using the inductor.
ACCESSORIES
Gallows - Cable carrier
OPTIONS
Ferrite
053823
053458
075948
Preventive maintenance
Meticulous inspections should be carried out at regular intervals to quickly detect and eliminate faults, so they will not
cause damage to the device.
Prior to each use of the POWERDUCTION, check the unit's security systems and any anomalies that may
hinder the proper operation of the device. Perform daily checks to identify signs of wear.
The operational safety of the product can only be guaranteed if the repairs are carried out using original
spare parts, and if the maintenance instructions are followed.
After each use and once the product is switched off, it should be cleaned immediately to remove any dust or
dirt that may impair cooling efficiency, affect the proper functioning of the product and reduce its lifespan.
Before each use, check the good operation of the main systems, security systems, and all the electrical
cables connection.
Perform periodic visual inspections to verify that there are no cooling liquid leaks, and check that the vents
are not obstructed.
32
POWERDUCTION 37LG / 39LG / 50LG
39LG - 50LG
052284
39LG - 50LG
Protection
056909
056916
Glue kit for inductor
Special welding liquid coolant
10 l
052246
37LG
2 fixing brackets
(if choice trolley option)
37LG
UNIVERSAL 800 + Gallows
054851
Bi-component
power epoxy glue
051331 + 052284
50 ml
5 l
062511
EN
Advertenties
Inhoudsopgave
