Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Translation of the original instructions
If the flow is correct, the machine emits a double «BEEP» and the product is ready to operate.
Otherwise a fault is displayed (refer to the fault code table).
Inductors and Adapters
The Powerduction 37LG is equipped with a fixed connection S and is supplied as standard with the S90 inductor.
The Powerduction 39LG and 50LG are delivered with the complete C20/B1 inductor.
The other accessories are optional, they extend the heating possibilities to a wide range of applications.
Discover the
complete range
Complete inductors
C20/B1
Ref. 056862
C180/B1
Ref. 056879
C180/B2
Ref. 056886
«PURGE» MODE (39LG & 50LG)
This mode is only available if the heat is not activated (green switch is off).
1. Push the button (10), the pump stops and the LED (9) lights up.
2. Position the torch on its support and place the cable on the floor (to avoid liquid spillage).
3. Unscrew the accessory using key 27 (supplied with the machine).
4. Push and hold the heat authorisation button (2) for 3 seconds until it lights up.
5. Place the torch button above a bucket with a capacity of 10l minimum.
6. Push the torch button (11). The pump activates until the debit falls under 1l / minute or for 2 minutes. The ma-
chine displays the debit in decilitre per minute.
7. To interrupt the pump during the cycle, push any button.
8. To empty the cooling circuit, use a blower to blow air (30PSI) at the end of the torch until you can hear the air
flowing or projections of liquid coming out of the tank.
9. To empty the tank, use a pump or push the machine forward in order to have it at an angle.
10. To top up the cooling liquid, refer to the installation instructions.
It is recommended to change the cooling liquid every year, otherwise you may damage the POWERDUCTION's lance.
Prefer the use of the special welding coolant offered with Powerduction (see § Maintenance).
30
POWERDUCTION 37LG / 39LG / 50LG
Adapters
28S
Ref. 064485
Inductors
S90
Ref. 058927
S180
Ref. 059269
S180/B1
Ref. 064881
39 LG
S70
L90
Ref. 061569
Ref. 059788
S20/B1
L70
Ref. 064874
Ref. 059771
S180/B3 W
L180
Ref. 067899
Ref. 059795
EN
28L
Ref. 064492
L180 SPIRAL
Ref. 065000
L20/B4
Ref. 067882
L20 ALU
GLOVE
Ref. 069114
L180 D80
Ref. 069121
50 LG
Advertenties
Inhoudsopgave
