Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Displays:
ENTFERNUNG/KCAL (DISTANCE/CAL) - Display:
Shows the distance you run in kilometers or calories consumed
in kcal.
ZEIT/PULS (TIME/PULSE) - Display:
Shows the time of exercising in minutes or heart rate.
GESCHWINDIGKEIT (SPPED) - Display :
Shows the speed of the treadmill in kilometers per hour.
Key-Function:
[START]-Key:
Press this key to start exercise program (motor starts running).
[STOP]- Key:
Press this key during exercise to interrupt the program (motor stops
running). Within 5 min. you can press [START]-key again to conti-
nue this exercise program or press [STOP]-key again to finish this
program. Pre-values can set to zero by pressing the [STOP] - key.
[EINGABE] -Key (ENTER):
Select key of Time-program, Distance-program or Calories-program.
[PROG.]-Key (Programs):
Press this key to select exercising programs P1- P15.
[+]-Key:
Press speed up -key increase settings or motor speed.
[-]-Key:
Press speed down -key decrease settings or motor speed.
Quick Speed -keys 4 and 8 km/h
Press one of these keys and the speed changes direct into 4 or 8
User manual of Computer
Manual
How to start manual mode:
Put in the AC plug in wall power 220V-240V, 50HZ-60HZ and put
on the power switch. Put safety clip on to the computer and it will
show normal manual mode. Stand your feet on both side rails. Put
the safety key at you exercise cloth and press [START]-key to start
with exercising. After a 3 sec. count down, the motor begin to run
slowly and you can step on the running belt and follow the speed.
Adjust the speed with [+/-]- keys into desired speed. If put off the
safety clip from computer at any time, the motor stop slowly and
the display will show „---". After put on the safety key on computer
the normal manually program will show. Press [+/-] key to adjust
value of speed. Press quick speed key to adjust speed quickly. All
values of the displays will counter up.
Time-Program:
Press the [EINGABE]-key once and the time display lights up. [ZEIT/
PULS] -Display shows a suggestion of 30:00 minutes. Press [+/-
]-key to set value. The range is: 5:00-99:00min. If set a value the
display counts up till zero and then stops running motor.
Distance-Program:
Press the [EINGABE]-key until the distance lights up. [DISTANCE/
CAL] Display shows a suggestion of 1:00 km/h. Press [+/-]-key to
set value. The range is: 0,50- 99:90KM. If set a value the display
counts up till zero and then stops running motor.
Calories-Program:
Press the [EINGABE]-key until the KCAL lights up. [DISTANCE/
CAL] Display shows a suggestion of 50,0 kcal. Press [+/-]-key to set
value. The range is: 10-990 kcal. If set a value the display counts
up till zero and then stops running motor.
19
Advertenties
Inhoudsopgave
