Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Assembly Instructions
Unpacking and Operation
Before usage, observe our recommendations and safety in-
structions.
Step 1:
Remove the treadmill (1).
Remove small parts, loose packing material out of the box and
then take out with help of a second person the preassembled
frame of packaging. Put your hands below the main frame (1) and
take care of no squeezing.
Step 2:
Unfolding the support tubes (3+4)
Fold up the supports left and right (3+4) with care and lock up the
upright position of supports (3+4) by screw in the support screws
(30). (Make sure that the lock engages each other.)
Step 3:
Positioning the handles (6+7) and the computer (5).
ATTENTION: When assembly the hand bar, please attention the
hole on the hand bar is downward.
1. Put the left handle (6) in the direction as shown on the picture.
Use small rotary knob (57) with Isolation nylon pad (34) to lock the
handle tightly.
2. Right side same as left side. As shown on the picture.
3. After using for a time, if the handle is loose, please fasten the
rotary knob (57) again.
4. Flip the computer (5) until the positioning pin (62) pops in.
15
Advertenties
Inhoudsopgave
