Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
28
www.electrolux.com
If the advice does not lead to
the desired result, contact
the nearest Authorised
Service Centre.
6.2 Replacing the lamp
1. Disconnect the plug from the mains
socket.
2. Push the movable part of the lamp
cover (1) to unhook it.
3. Remove the lamp cover (2).
1
7. INSTALLATION
WARNING!
Refer to Safety chapters.
7.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
class
SN
N
ST
T
7.2 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
2
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
4. Replace the bulb with one of the
same power and shape, specifically
designed for household appliances.
5. Install the lamp cover.
6. Connect the plug to the mains
socket.
7. Open the door. Make sure that the
light switches on.
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.
7.3 Installation of the appliance
and door reversal
Please refer to separate
instructions on installation
(ventilation requirements,
levelling) and door reversal.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
